Call:- 01670-070357 to repair your industrial electronics items.

6ES7131 6BH00 0BA0 DC digital input module


Brand: Siemens
Model: 
ET 200SP
Part No.: 6ES7131 6BH00 0BA0
Specification:
SIMATIC ET 200SP, DIGITAL INPUT MODULE, DI 16X 24VDC STANDARD
Origin: Germany
Condition: New but without packet
Warranty: Three Months

6ES7131 6BH00 0BA0 Manual
Show Other Products

Call for Repair

6ES7131 6BH00 0BA0 Siemens DC digital input module for et 200sp

The 6ES7131 6BH00 0BA0 DC digital input module (Standard) – Siemens (SIMATIC ET 200SP) – DI 16 x 24 V DC ST – 16I/Os [16DI (16 x digital inputs (24Vdc / 11-30Vdc P-reading))] – Supply voltage 24Vdc – with LED indicator – Backplane / rack mounting – width 15mm – CC00 colour  ASM_OTHER_SIMATIC ET 200SP

6ES7131 6BH00 0BA0 Specifications:

  • Supply voltage (DC): 24Vdc
  • Compliant with standard(s): IEC61131
  • Mounting mode: Backplane / rack
  • Digital inputs quantity: 16
  • Product series / family name: SIMATIC

The module has the following technical properties:

  •  Digital input module with 16 inputs
  • Sink input, (PNP, P-reading)
  • Supply voltage L+
  • Configurable input delay 0.05 to 20 ms (per channel)
  • Configurable diagnostics (per module)
  • Suitable for connection of switches and 2-wire sensors in accordance with IEC 61131, type 3 The module supports the following functions:
  • Firmware update
  • I&M identification data
  • Configuration in RUN

Parameters for DI 16x24VDC ST

The effective range of the configurable parameters depends on the type of configuration. The following configurations are possible:

  • Central operation with an ET 200SP CPU
  • Distributed operation on PROFINET IO in an ET 200SP system
  • Distributed operation on PROFIBUS DP in an ET 200SP system

1 If you use a floating switch, you need to connect a resistor in parallel so that the wire break diagnostics is enabled in the open state (sensor resistance for the wire break diagnostics: 25 kΩ to 45 kΩ).
2 Due to the limited number of parameters with a maximum of 244 bytes per ET 200SP station for a PROFIBUS GSD configuration, the configuration options are restricted. If required, you can assign these parameters using data record 128 as described in the “GSD file PROFINET IO” column (see table above). The parameter length of the I/O module is 4 bytes.

SKU: 6262 Category:
Call Now Button