Call:- 01670-070357 to repair your industrial electronics items.

6ES7134 6GD00 0BA1 Analog Input Module


Brand: Siemens
Model: 
ET 200SP
Part No.: 6ES7134 6GD00 0BA1
Specification:

  • AI 4XI 2-/4-WIRE STANDARD
  • FITS TO BU-TYPE A0,A1,
  • COLOR CODE CC03
  • 16BIT

Origin: Germany
Condition: Used/refurbished
Warranty: Three months

6ES7134 6GD00 0BA1 Manual
Show Other Products

Call for Repair

6ES7134 6GD00 0BA1 Analog Input Module for ET 200SP

6ES7134 6GD00 0BA1 Description

Analogue input module 6ES7134 6GD00 0BA1 (Standard) – Siemens (SIMATIC ET 200SP) – AI 4 x I 2/4-wire ST – 4I/Os [4AI (4 x analog inputs (0-20mA / -20…+20mA / 4-20mA) differential)] – Supply voltage 24Vdc – with LED indicator – Backplane / rack mounting – width 15mm – CC03 colour – Order code 6ES71346GD000BA1
SIMATIC ET 200SP,AI 4XI 2-/4-WIRE ST.The scalable SIMATIC ET 200SP I/O system is a highly flexible, modular I/O system with IP20 degree of protection.

6ES7134 6GD00 0BA1 Features:

  • Configuration control: application-based adaptation of the actual configuration via user software (option handling)
  • Time-based IO: time stamping of the signals to the μs
  • MSI/MSO: Simultaneous access to I/O data from up to 4 PLCs
  • Oversampling: n-fold acquisition or output of digital and analog signals within a PN cycle
  • Adaptation of measuring range: increased resolution by adapting the measuring range to a limited section of a measuring range supported by the analog input module
  • Scaling of measured values: permits the transmission of the analog value normalized to the required physical value as a REAL value (32-bit floating point)
  • Communication standards: PROFINET IO, PROFIBUS DP V0/V1, ET connection for connecting the ET 200AL (IP67), IO-Link V1.1, AS-Interface
  • CPU: PROFINET connection with 3 ports, IO controller and PN IO device, Optional expansion as DP master/slave, Also as fail-safe version and Open Controller
  • Point-to-point (RS 232, RS 485, RS 422)
  • Modular configuration with up to 64 modules
  • System-integrated self-assembling load group supply without power module via light Base Units
  • Small size and highly flexible due to the modular design and comprehensive product range
  • Up to 16 channels per module
  • Permanent wiring
  • Hot swapping: Module replacement without tools in RUN
  • Operation with gaps
  • Push-in terminals for cross-sections up to 1.5 mm2 with wire end ferrule, and up 2.5 mm2 without wire end ferrule

Applications:

Mode of operation: Via PROFINET or PROFIBUS, a central controller can access the distributed I/O modules of the ET 200SP in the same way as central I/O modules.
Communication is handled entirely by the PN controller or the master interface module (in the central controller) and in the IM 155-6. Interference-free internal data transfer using shielded cables.
Comprehensive, channel-specific and easy-to-program diagnostics with plain text messages permit the localization and correction of plant errors in the shortest possible time and significantly increase availability.
Configuration, parameterization and diagnostics: The ET 200SP is configured and assigned parameters via STEP 7 or the configuration tool of the controller used.

Siemens ET 200SP series Analog input module has 4 differential analog inputs with permissible input current rated up to 50-Milli – Amps to perform all your activity. This analog input module is voltage rated at 24-Volts DC with permissible upper and lower limit range of 28.8-Volts and 19.2-Volts respectively, ensuring reverse polarity protection. The module has 37-Milli-Amp of current consumption rate. This module allows for potential separation of channels with 2-Wire current input group and 4-Wire voltage input group. The analog input module helps in performing module diagnostics function and is compatible with BU-type A0 and A1 base units.
Extensive diagnostic information is available to the user, depending on the selected I/O module

Specifications:

  • Product series / family name SIMATIC
  • Main function I/O unit
  • Sub-range name ET 200SP
  • Supply voltage(DC) 24 V
  • Supply voltage (DC)24Vdc
  • Mounting mode Backplane / rack
  • Analog inputs quantity 4
  • Analog inputs 4 x analog inputs (0-20mA / -20…+20mA / 4-20mA) differential
  • Display type LED indicator
  • Functions Analogue input module (Standard)
  • CC03
  • Current measurement
  • Re-parameterization during operation

6ES7134 6GD00 0BA1 Manual
Show Other Products

Call: 01670070357

SKU: 6266 Category:
Call Now Button