Beckhoff KL2612

Beckhoff KL2612 Relay Output Terminal

The KL2612 output terminal switches two relays, each having one changeover contact, under control of the automation device. It has potential-free contacts. The power contacts are not looped through.

Specification:

• Number of outputs: 2 x change-over
• Nominal voltage: 125V AC/30V DC
• Load type: ohmic
• Max. output current: 2A per channel
• Switching current: 0.5A AC/2 A DC (ohmic)
• Ohmic switching current: 0.5A AC/2 A DC
• Inductive switching current: no data
• Minimum permitted load: 10 µA at 10 mV
• Lamp test, electronic ballast: max. 2 A starting current
• Electrical isolation: 500V (K-bus/field potential)
• Current consumption power contacts: –
• Current consumption K-bus: typ. 60 mA
• Bit width in the process image: 2 outputs
• Operating cycles mech. (min.): 1 x 108
• Operating cycles electr. (min.): 2 x 105 (1 A/30 V DC)
• Configuration: no address or configuration setting
• Special features: signal relay
• Weight: approx. 80 g
• Operating/storage temperature: 0…+55 °C/-25…+85 °C
• Relative humidity: 95 %, no condensation

Download Manual
Show Other Products