Beckhoff KL2612 Relay Output Terminal
The KL2612 output terminal switches two relays, each having one changeover contact, under control of the automation device. It has potential-free contacts. The power contacts are not looped through.
Specification:
- Number of outputs: 2 x change-over
- Nominal voltage: 125V AC/30V DC
- Load type: ohmic
- Max. output current: 2A per channel
- Switching current: 0.5A AC/2 A DC (ohmic)
- Ohmic switching current: 0.5A AC/2 A DC
- Inductive switching current: no data
- Minimum permitted load: 10 µA at 10 mV
- Lamp test, electronic ballast: max. 2 A starting current
- Electrical isolation: 500V (K-bus/field potential)
- Current consumption power contacts: –
- Current consumption K-bus: typ. 60 mA
- Bit width in the process image: 2 outputs
- Operating cycles mech. (min.): 1 x 108
- Operating cycles electr. (min.): 2 x 105 (1 A/30 V DC)
- Configuration: no address or configuration setting
- Special features: signal relay
- Weight: approx. 80 g
- Operating/storage temperature: 0…+55 °C/-25…+85 °C
- Relative humidity: 95 %, no condensation