CP-E 24/5.0 1SVR427034R0000 ABB
The CP-E Primary switch mode power supplies by ABB are optimized for worldwide applications. They can be supplied within a wide range of AC or DC voltages. True redundancy can be achieved for de-coupling and parallelized power supply units < 48 volts.The power supply provides an U/I output characteristic. In order to increase capacity, up to 3 units can be connected in parallel. A redundancy unit is available as accessory.
Features :
- Output Voltages 5V, 12V, 24V, 48V DC
- Adjustable Outputs
- High Efficiency Of Up to 90 Percent
- Open-Circuit, Overload, and Short Circuit Stable
- Low Power and Heating Dissipation
- Integrated Input Fuse
- LED’s For Status Indication
Specification:
- Type : CP-E
- Number of Phases : 1
- Output Power : 120 W
- Rated Output Voltage : 24 V DC
- Output Current : 5 A
- Frequency Limits: 47 to 63 Hz
- Width: 63.2 mm
- Height: 123.6 mm
- Depth: 123.6 mm
- Net weight: 0.882 kg
- Pollution Degree: 2
- Tightening Torque: Input Circuit 1 N·m Output Circuit 0.62 N·m
- Mounting Position: Position 1
- Wire Stripping Length: Input Circuit 8 mm Output Circuit 8 mm
- Minimum Mounting Distance: Electrical Conductive Board, Horizontal 25 mm Electrical Conductive Board, Vertical 25 mm Other Device Same Type, Horizontal 25 mm Other Device Same Type, Vertical 25 mm
- Connecting Capacity Input Circuit UL/CSA: Rigid 24-10 AWG
- Connecting Capacity Output Circuit UL/CSA: Rigid 24-10 AWG
- Degree of protection: IP20 house IP20 terminals
CP-E 24/5.0 Manual
Show Other Products
There are no reviews yet.