Delta DVP14SS211R Programmable Logic Controller
Delta DVP14SS211R PLC Overview:
- Second Generation Standard Slim MPU
- Power: 20.4 to 28.8 VDC
- Digital Inputs: 8 inputs, 24 VDC sink or source
- Digital Outputs: 6 relay outputs
- Output Rating 1.5A each output
- Communication Port: RS-232 and RS-485, Modbus ASCII/RTU master or slave
- Program Capacity: 8 k steps
- IO Points: Up to 238 via expansion modules
- Software Up/Down Counters: Any input, up to 10 kHz on a single input
- Software Quadrature Inputs: 2 – X4/X5 (5 kHz) and X6/X7 (5 kHz)
- Hardware Up/Down Counters: 2 – X0 and X2, both 20 kHz
- Hardware Quadrature Inputs: 2 – X0/X1 and X2/X3, both 10 kHz
- Power protection With counter-connection protection on the polarity of DC input power
- Insulation resistance > 5M? (all I/O point-to-ground: 500VDC)
- Noise immunity
- ESD: 8kV Air Discharge
- EFT: Power Line: 2kV, Digital I/O: 1kV, Analog & Comm. I/O: 250kKV
- RS: 26MHz ~ 1GHz, 10V/m
- Grounding
- The diameter of grounding wire cannot be smaller than the wire diameter of terminals L and N (All DVP units should be grounded directly to the ground pole).
- Operation / storage Operation: 0°C ~ 55°C (temp.), 50 ~ 95% (humidity), Pollution degree2
- Storage: -25°C ~ 70°C (temp.), 5 ~ 95% (humidity)
- Vibration / shock
- resistance
- International standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 & IEC 68-2-27 (TEST Ea)
- 24VDC (-15% ~ 20%) (with counter-connection protection on the polarity of DC input power)
- Inrush current: Max. 7.5A@24VDC
There are no reviews yet.