EL4102 Beckhoff EtherCAT Terminal

EL4102 Beckhoff

The EL4102 Beckhoff analog output terminal generates signals in the range between 0 and 10 V. The voltage supplied to the process level with a resolution of 16 bits and electrically isolated. The output channels of the EtherCAT Terminal have a common ground potential. The EL4102 combines two channels in one housing. The signal state of the EtherCAT Terminal  indicated by light emitting diodes.

Beckhoff offers ideally-suited components and streamlined automation systems for the EtherCAT real-time Ethernet system: Industrial PCs and Embedded PCs offer a high-performance basis for PLC and Motion Control on the PC. With the EtherCAT I/Os, real-time Ethernet is available down to each I/O module in a large selection for all signal types. Highly dynamic Servo Drives permit an integrated, fast control technology.

Specification:

• Connection technology: 2-wire, single-ended
• Number of outputs: 2
• Power supply: via the E-bus
• Signal voltage: 0…10 V
• Distributed clocks: yes
• Distributed clock precision: << 1 µs
• Load: > 5 kΩ (short-circuit-proof)
• Output error: < 0.1 % (relative to end value)
• Resolution: 16 bit (incl. sign)
• Electrical isolation: 500 V (E-bus/signal voltage)
• Conversion time: ~ 40 µs
• Current consumption power contacts: –
• Current consumption E-bus: typ. 210 mA
• Bit width in the process image: 2 x 16 bit AO output
• Special features: Watchdog parameterisable; user synchronisation can be activated.
• Weight approx.: 60 g
• Operating/storage temperature: -25…+60 °C/-40…+85 °C
• Relative humidity: 95 %, no condensation
• Vibration/shock resistance: conforms to EN 60068-2-6/EN 60068-2-27
• EMC immunity/emission: conforms to EN 61000-6-2/EN 61000-6-4
• Protect. class/installation pos.: IP 20/variable
• Pluggable wiring: for all ESxxxx terminals
• Approvals: CE, UL, Ex

EL4102 Beckhoff Manual
Show Other Products