Fuji Frenic FRN3 7G11S 4JE
Fuji Frenic 5000 G11 Overview: Its a 3.7kW inversion drive from the Frenic 5000 G11 series. This three phase inverter can apply to a number of general purpose motor activities. A number of factory parts, like packing machines, water pumps, and automatic doors, can benefit from inversion drives like this. Drive efficiency integrated into the system, allowing for a wide array of uses. An onboard dynamic torque vector control intelligently determines the motor output required for a specific load. Remote access to the drive a feature of the overall design. The front mounted keypad detachable, allowing for remote operation of this device.
Voltages coming into and leaving FRN3.7G11S-4je should monitor to ensure that they operates at safe levels. This drive capable of producing a voltage output ranging between 380V and 460V, while the maximum output voltage the drive can produce rates at 480V. Output ranges are accompanied by a frequency range anywhere from 0.1Hz to 400Hz. Input voltages sourced to the inverter can measure from 380V to 480V, with a frequency of 50/60Hz.
Fuji Electric, the manufacturer, provides a detailed list of installation parameters that should follow to ensure that the device operates properly. FRN3.7G11S-4 housed in a NEMA 1 enclosure which is suitable for indoor installation only. Factories and lines housing this drive should be climate controlled, maintaining ambient temperatures between -10℃ and 50℃ (14℉ and 122℉). As well as complete installation and safety guide is available in the Frenic 5000 G11 series manual as well as the device datasheet. As well as technical support was provided by Fuji Electric.
- Power: 6.8kVA
- Number of phase: 3
- Input: 3PH 380-480V 50-60HZ 14.9A
- Output: 3PH 6.8kVA 380-460V 0.1-400Hz 9A as well as.