FX2N 4AD Mitsubishi
FX2N 4AD Details:
- Analogue Input Module: The FX2N 4AD module with analog input is used to convert the analog input into a digital value of 12 bits, and to forward the values to the PLC controller. FX2N-xAD can be connected with FX0N, FX2N, and the FX2NC series Programmable controllers.
- Voltage and current input: A/D conversion characteristics can be adjust.Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC’s
Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.
All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.
|Manufacturer Series||FX1N Series, FX3G Series, FX3U Series|
|Number of Inputs||4|
|For Use With||FX1N Series, FX3G Series, FX3U Series|
|Number of I/O||4|
|Voltage Category||5 V dc, 24 V dc|
|Dimensions||90 x 55 x 87 mm|
|Maximum Operating Temperature||+55°C|
|Minimum Operating Temperature||0°C|