Honeywell R4343E1014 Burner detector / Flame Detector / Flame Sensor


Honeywell R4343E1014 Burner detector

Brand: Honeywell
Model: R4343 E1014
Specifications : 

•  The R4343D/E series is a flame switch for intermittent operation
to indicate presence or absence of a flame and to be applied in commercial
or industrial burner installations. light.
•  Flame current meter jack socket on the front permits monitoring of flame
signal strength, by using any appropriate microampere meter
(0-10uA minimum scale).
•  Plug-in mounts onto a sub base (included) for surface mounting.
•  Providing an indication of absense or presence of a flame in intermittent
industrial oil/gas burner applications by an open or closed relay contact. 
•  Approvals: CE approved according EN298 (for intermittent operation)
•  Protection class: IP40
•  Ambient temperature: -10…60C
•  Maximum humidity: 90%rh
•  R4343D models are for use with rectification type flame sensors, such as
flame rods and C7012A/G UV sensors.
•  R4343E models are for use with Honeywell UV sensor models C7027,
C7035 and C7044.
•  Note: The R4343D models will operate also with the “Satronic”
IRD820/1020 range of infrared sensors. Note that this combination is
NOT CE approved for use on installations that fall under the GAD
(Gas Appliances Directive). 
•  Outputs: 1xDPDT
•  Operation: Intermit.
•  UV flame detectors
•  Flame failure response time: <1s
•  Flame detector: UV
•  Supply voltage: 220..240 Vac

Condition: Fresh
Origin: France
Warranty: Three months.
Download Manual
Show Other Products

৳ 16,500.00

Honeywell R4343E1014 Burner detector / Flame Detector / Flame Sensor

Honeywell R4343E1014 Burner detector / Flame Detector / Flame Sensor :

The Honeywell R4343E1014 is a flame switch for intermittent operation to indicate presence or absence of a flame as well as applied in commercial or industrial burner installations. light.

  • Flame current meter jack socket on the front permits monitoring of flame signal strength, by using any appropriate microampere meter (0-10uA minimum scale).
  • Plug-in mounts onto a sub base (included) for surface mounting.
  • Furthermore provides an indication of absence or presence of a flame in intermittent industrial oil/gas burner applications by an open or closed relay contact.

Specifications:

  • The R4343D/E series is a flame switch for intermittent operation to indicate presence or absence of a flame as well as to be applied in commercial or industrial burner installations. light.
  • Flame current meter jack socket on the front permits monitoring of flame signal strength, by using any appropriate microampere meter (0-10uA minimum scale).
  • As well as plug-in mounts onto a sub base (included) for surface mounting.
  • Providing an indication of absense or presence of a flame in intermittent industrial oil/gas burner applications by an open or closed relay contact. 
  • Approvals: CE approved according EN298 (for intermittent operation)
  • Protection class: IP40
  • Ambient temperature: -10…60C
  • Maximum humidity: 90%rh
  • R4343D models are for use with rectification type flame sensors, such as flame rods and C7012A/G UV sensors as well as.
  • R4343E models are for use with Honeywell UV sensor models C7027, C7035 as well as C7044.
  • Note: As well as the R4343D models will operate also with the “Satronic” IRD820/1020 range of infrared sensors. Note that this combination is NOT CE approved for use on installations that fall under the GAD (Gas Appliances Directive). 
  • Outputs: 1xDPDT
  • Operation: Intermit.
  • UV flame detectors
  • Flame failure response time: <1s
  • Flame detector: UV
  • Supply voltage: 220 – 240 Vac

Honeywell R4343E1014 Manual
Show Other Products

SKU: 5729 Category: