Lenze EVS9322 ES SERVO INVERTER
Lenze EVS9322 ES Electrical Specifications:-
AC-mains connection |
||
Max. mains voltage range |
320 V – 0 % … 528 V + 0 % | |
Mains frequency | 45 Hz – 0 % … 65 Hz + 0 % | |
Power system TT, TN |
Operation permitted without restrictions with earthed neutral. |
|
Power system IT | Operation only permitted with the device variants V024 or V100. Operation permitted without restrictions with insulated neutral. Observe instructions on specific measures! |
|
Operation on public supply systems |
EN 61000-3-2 | Limitation of harmonic currents |
Total output at the mains |
Compliance with the requirements 1) |
|
< 1 kW | With mains choke. | |
> 1 kW | Without additional measures. |
|
1) The additional measures mentioned have the effect that solely the controllers meet the requirements of EN 61000-3-2. The machine/system manufacturer is responsible for the compliance with the requirements for the machine/system! |
||
DC-mains connection |
||
Max. mains voltage range |
450 V – 0 % … 740 V + 0 % | |
Operating conditions |
DC voltage must be symmetrical to PE. The controller will be destroyed when +UG or -UG are earthed. |
Motor connection
Length of the motor cable |
< 50 m No additional output filters are required at a rated mains voltage and a switching frequency of 8 kHz. If EMC requirements have to be met, the permissible cable length may be affected. |
Mounting conditions
Mounting place | In the control cabinet |
Mounting position | Vertical |