Mitsubishi FX2N 4DA Module
Mitsubishi FX2N 4DA analog output modules provide the user with 4 analog outputs. The modules convert digital values from the FX0N/FX2N controller to the analog signals required by the process. The modules can output both current and voltage signals With 4 analogue output channels. It requires a separate 24Vdc power source.
Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.
The FX2n-4DA analog special function block has four analog output channels. The output channels2Ntake a digital value and output an equivalent analog signal. This is known as a D/A conversion. TheFX2n-4DA has a maximum resolution of 12 bits.The selection of voltage or current based input/output is by user wiring. Analog ranges of -10 to 10VDC (resolution: 5mV), and/or 0 to 20mA (resolution: 20µA) maybe selected independently for each channel.
- Product type : Analog Output Modules
- Power Supply: 5 VDC/30 mA (from main unit); 24 VDC/200 mA
- Analog Channels: 4 outputs
- Related I/O points: 8
- Analog Input Range: -10 to 10 VDC / 0 to 20mA DC / 4 to 20 mA DC
- Resolution (voltage): 5mV (11 bit + sign)