FX3UC 32MT DSS Mitsubishi PLC
FX3UC 32MT DSS :
Mitsubishi FX3UC 32MT DSS PROGRAMMABLE CONTROLLER 24VDC 0.1A 11W FX3UC32MT/DSS
- Our Part Number: FX3UC32MTDSS
- Height (mm): 90
- Width (mm): 34
- Depth (mm): 74
- Brand: Mitsubishi
- Manufacturer Series: FX3UC
- Manufacturer Range : FX Series
- No. of Inputs : 16
- No. of Outputs : 16
- Input Type: 24 VDC Sink/Source
- Output Type: Transistor (source)
[Up to 384 input/output points] 384 points in total include input/output points in the PLC (adjacent direct wiring) and remote input/output points in the network. Applicable
networks are the CC-Link, AnyWireASLINK and AS-i systems. (Up to 256 points in the FX3UC-32MT-LT earlier than Ver. 2.20)
[Powered extension units/blocks that can beconnected]
FX2N/FX2NC Series input/output extension blocks can be connected. Up to 8 FX0N/FX2N/FX3U/FX2NC/FX3UC Series special function units/blocks can be connected.
The PLC has a 64K-step RAM memory. Use of the memory cassette enables the program memory to be used as flash memory.
Various instructions, such as floating-point and character string processing instructions and scaling instructions, are provided.
[Built-in RUN/STOP switch]
The PLC can be started and stopped with the built-in switch. RUN and STOP commands can be given to the PLC through a general-purpose input terminal or peripheral device.
[Writing during RUN]
The programming software for personal computer enables you to modify the program while the PLC is running.
[Built-in clock function]
The PLC has a clock function to control the time.
Use a version of a programming tool supporting the FX3UC. *For peripheral devices not applicable to the FX3U/FX3UC Series, specify FX2N Series or FX2(FX) Series for the model selection, and you can program the sequence. In this case, use instructions and devices within the ranges common to FX3UC Series and the selected model of PLC (FX2N or FX2(FX) Series).
[Remote debugging of program]
Programming software (GX Works2, GX Developer) enables you to remotely transfer programs and monitor PLC operation through a modem connected to the RS-232C expansion board or RS-232C communication special adapter.