Call:- 01670-070357 to repair your industrial electronics items.

Pepperl & Fuchs KFD2 WAC2 Ex1.D Converter


Brand: Pepperl+Fuchs
Model: KFD2 WAC2 Ex1.D
Specification:

  • 1-channel isolated barrier
  • 24 V DC supply (Power Rail)
  • Strain gauge input (full or half bridge)
  • 2 relay contact outputs

Condition: Used/Refurbished
Warranty: Three Months
KFD2 WAC2 Ex1.D Manual
Show Other Products

Call for Repair

Pepperl & Fuchs KFD2 WAC2 Ex1.D Converter

KFD2 WAC2 Ex1.D Overview:

This Pepperl & Fuchs KFD2 WAC2 Ex1.D isolated signal conditioner is used for nonhazardous area applications. It is a 4-channel barrier with outputs that switch 600 mA to high-power solenoids. It is also used as a power amplifier up to a switching frequency of 1 kHz. These signal conditioners are suitable for SIL 2 applications.

Function:

This isolated barrier  used for intrinsic safety applications. The device used with strain gauges, load cells and resistance measuring bridges. Designed to provide 5 V excitation voltage, this barrier’s high quality A/D converter allows it to use with those devices requiring 10 V. Up to four 350 Ω strain gauges connected in parallel may be powered and evaluated. The device easily configured by the use of keypad or with the PACTware configuration software. The current measurement for tare, zero point, and final value can be entered in this manner. A fault is signalized by LEDs acc. to NAMUR NE44 and a separate collective error message output

Features:

  • 1-channel isolated barrier
  • 24 V DC supply (Power Rail)
  • Strain gauge input (full or half bridge)
  • 2 relay contact outputs
  • Output 0 mA … ± 20 mA or 0 V … ± 10 V
  • Programmable high/low alarm
  • Configurable by PACTware or keypad
  • RS-485 interface
  • Low response time
  • Line fault detection (LFD)

Specification:

  • Current Rating: 0-20 A
  • Input Type: Current, Voltage
  • Input, Range: -100 to +100, 5, 18 V, mA, mV
  • Interface: RS485
  • Maximum Operating Temperature: 60 °C
  • Minimum Operating Temperature: -20 °C
  • Module Type: Converter
  • Mounting Type: DIN Rail
  • Number of Channels: 1
  • Output Type: Current, Voltage
  • Series: KFD Series
  • Special Features: Line Fault Detection (LFD)
  • Supply Voltage: 20 to 35 VDC
  • Temperature Operating Range: -20 to +60 °C
  • Type: Strain Gauge
  • Connection side: field side
  • Signal type: Analog input

Download Manual
Show Other Products

SKU: 6554 Category:
Call Now Button