Icp Con High Speed Isolated RS 485 Repeater
Icp Con RS 485 Repeater :
This device is an isolator and repeater for RS485 network. It is possible to isolate a RS485 branch of network or/and repeat the signal.This product is suitable for solving various problems of a RS485 line, extensions of the line, increasing the nodes number, galvanic isolation, to get a strong protection from the sparks noise as well as electrostatic charges or simply to change the baud rate of the communication.
Product Specification:
- Brand Name : Icp Con
- Height Mm : 122
- Humidity Percent : 5 to 95 %
- Input Voltage Dc : 10 to 30
- Isolation Voltage : 3000V DC
- Item Weight G : 200 g
- Maximum Power Watt : 2.2
- Model Text : I-7510
- Operating Temperature Celsius : -10 to 60
- Product Information : Form Factor : Din Rail Module.
Input: RS-485 (2-wire)
Output : RS-485 (2-wire) - Specific Uses Of The Product : Also can be used to boost the signal and provide isolation between different sections of a network.
- Storage Temperature Celsius : -20 to 80
- Tsin : T004389154
- Width Mm : 72
Boost, or amplify, RS-485 signals to cover longer distances with the Icp Con RS485 Repeater. By using differential voltage lines for data and control signals RS-485 repeaters overcome the limitations of standard serial ports. This allows you to add 4,000 feet (1.2 km) and 32 nodes to an RS-485 data circuit. In addition, 3-way isolation protects devices from transient surges and ground loops on the data line.
The Icp Con RS485 repeater was developed for the high requirements of fieldbus systems. The device can be powered by wall-mount AC or snapped onto standard DIN rails and supplied with 24 V DC or AC.
The maximum distance of RS-485 without using a repeater is 4000 feet (1220 meters) at baud rates up to 90Kbps. Extend that distance by adding an RS-485 Repeater or Optically Isolated Repeater every 4000 feet.