Call:- 01670-070357 to repair your industrial electronics items.

Siemens 6AV6 545 6BC00 0BN0 HMI Motherboad 6 Inch


Brand: Siemens
Model: TP 170B
MPN: 6AV6 545 6BC00 0BN0
Specification:

  • Touch Panel 170B
  • Display Size: 6”
  • Construction-related opening – not a slot for a memory card
  • Recess for spring terminal
  • The memory card is an option.

Condition: Used/Refurbished
Origin: Germany
Warranty: Three months
6AV6 545 6BC00 0BN0 Manual
Show Other Products

Call for Repair

Siemens  TP 170B 6AV6 545 6BC00 0BN0 HMI Motherboad

Siemens 6AV6 545 6BC00 0BN0 HMI Motherboad:  The TP 170A, TP 170B, OP 170B equipment manual is part of the SIMATIC HMI documentation. It provides operation, installation, configuration and maintenance personnel with information concerning installation, functionality, operation and technical design of the SIMATIC operating units TP 170A, TP 170B and OP 170B.

  • For the TP 170B and OP 170B:
  • The memory card is an option.
  • A commercially available CF memory card (Compact Flash, Type 1) can be used as an external storage medium. A CF card which has been tested and approved is available from Siemens AG.

For MPI/PROFIBUS DP transfer, the bus parameters, such as the MPI/PROFIBUS DP address and baud rate, are read from the project currently active on the HMI device.
The settings for the MPI/PROFIBUS DP transfer should not be changed. The project must first be stopped and the settings then changed via menu options “Control Panel > S7- Transfer Settings”. Then switch back to transfer mode. When the project is restarted, the bus parameters for the selected profile “MPI” or “PROFIBUS DP” are overwritten by the values in the project configuration.

Transferred data is written directly to the HMI device’s Flash memory. The project source file can also be transferred to the HMI device for processing a project later. Due to memory capacity, the source file is not transferred to the internal Flash memory but to the memory card. To save transfer time, a delta transfer option is available for Windows CE HMI devices. In the case of a delta transfer, only project data that has changed relative to the data on the HMI device is transferred.

Specification:

  • Touch Panel 170B
  • Display Size: 6”
  • Construction-related opening – not a slot for a memory card
  • Recess for spring terminal

6AV6 545 6BC00 0BN0 Manual
Show Other Products

SKU: 6612 Category:
Call Now Button