Siemens 7NG4123 1AN00 Signal Isolator


Siemens Sitrans Signal Isolator 7NG4123-1AN00

Brand: Siemens
Model: 7NG4123-1AN00
Specification:

  • Type: Signal Isolator
  • Power Supply: 24v
  • 2-WIRE Transmitters
  • Operating: -20 to +65°C
  • Weight: about 175g

Condition: Used(Almost New)
Warranty: Three Months
Download Manual
Show Other Products

৳ 11,000.00

Siemens 7NG4123 1AN00 

Signal Isolator  7NG4123-1AN00 (7NG41231AN00) from the brand SIEMENS is from the NC range. The device provides fully floating dc supply for energizing 4 to 20 mA 2 wire transmitter or a separately powered transmitter with current or voltage outputs and repeats the signal in a fullyfloating circuit to drive a galvanic isolated load.However, Input configuration will be done by a rotary switch on the front plate. Configuration of output signal (current or voltage) will be made by jumpers on the backside. Installation must be in accordance to EN 60950. It must be possible to switch off the device using a suitable disconnecting device outside the power supply. (Primary side line protection could use).

Features:

  • SITRANS isolating power supply / isolating amplifier for rail mounting
  • For power supply of 2-wire transmitters and galvanic isolation of current/voltage signals.

Specification:

  • Type: Signal Isolator
  • Power Supply: 24v
  • 2-WIRE Transmitters
  • Operating: -20 to +65°C
  • Weight: about 175g
  • Connection: By polarized plug-in disconnect scew terminal blocks; terminations up to 2,5 mm2
  • Protection class: IP20
  • Dimensions: Width 22,5 mm, Depth 99 mm, High 114,5 mm for version UC 24V Width 35mm, Depth 79mm, High 117,5mm for version AC 230V

Download Manual
Show Other Products

5/5 (1 Review)
SKU: 6380 Category:
%d bloggers like this: