Call:- 01670-070357 to repair your industrial electronics items.

Siemens ip converter 77116STF1


Brand: Siemens
Model:  77116STF1
Specifications :

  • Input: 4-20mA
  • Output: 3-15 psig
  • 250KPA MWP 15VDC MAX
  • Supply Pressure: 20 psig (35 psig for 771-8_ _ _)
  • Zero Offset Adjustment: +40% and –20% of span
  • Output Capacity: Standard: 0.16 scfm Boosted: 2.0 scfm
  • Supply Pressure Effect: Less than 2% of span (change of output for supply change from 18 to 22 psig)
  • Temperature Range:-40 to 180°F (-40 to 82°C)
  • Electrical Connections: Enclosed terminal block, 1/2″ threaded
  • Enclosed: NEMA 3RNEMA 4 via conduit ven
  • Performance Specifications
    -Calibration Accuracy: ±1/2% of span standard unit, ±1% of span boosted unit
    -Reproducibility: 0.2% of span
    -Response Level:0.025% of span

Condition: Used/Refurbished
Origin: Germany
Warranty: Three months.

Call for Repair

Ip converter Siemens 77116STF1

Siemens ip converter 77116STF1 :

The Siemens ip converter 77 and 771 convert DC millampere input signal directly proportional to the input into pneumatic output signal. Their robust design as well as  resistance to shock and vibration enable them to be installed in even the toughest industrial environments.

Siemens ip converter 77116STF1 is a cost-effective valve service current-to-pressure transducer. The Model 771 receives an electronic device’s output signal such as PID control function and drives control valve through the transducer until the control function is fulfilled. Because it’s boosted output capacity minimizes time lags as well as the effects of leakage, also Model 771B should be used for direct-loading of valve actuators or other large volumes.  Also if the valve actuator includes a valve position , a Model 771S should be used.

Current to Pressure Converter Features & Benefits :

  • High signal sensitivity for demanding applications
  • Simplified design also ensures simplified operation
  • Rugged, NEMA construction, with insensitivity to shock,
  • vibration as well as supply pressure variations accommodate
  • operation in harsh industrial environments
  • Choice of output capacities provides application versatility

Specifications :

  • Input: 4-20mA
  • Output: 3-15 psig
  • 250KPA MWP 15VDC MAX
  • Supply Pressure: 20 psig (35 psig for 771-8_ _ _)
  • Zero Offset Adjustment: +40% and –20% of span
  • Output Capacity: Standard: 0.16 scfm Boosted: 2.0 scfm
  • Supply Pressure Effect: Less than 2% of span (change of output for supply change from 18 to 22 psig)
  • Temperature Range:-40 to 180°F (-40 to 82°C)
  • Electrical Connections: Enclosed terminal block, 1/2″ threaded
  • Enclosed: NEMA 3RNEMA 4 via conduit ven
  • Further more Performance Specifications
    -Calibration Accuracy: ±1/2% of span standard unit as well as ±1% of span boosted unit
    -Reproducibility: 0.2% of span
    -Response Level:0.025% of span

The pneumatic control signals are traditionally based on a pressure range of 3-15psi (0.2-1.0 bar), or more commonly now, an electrical signal of 4-20mA for industry, or 0-10V for HVAC systems. Electrical control now often includes a “Smart” communication signal superimposed on the 4-20mA control current, such that the health and verification of the valve position can be signalled back to the controller. The HART, Fieldbus Foundation, and Profibus are the most common protocols.

Siemens ip converter PDF Manual
Show Other Products

SKU: 5858 Category:
Call Now Button