-4%

Siemens MPI Cable 6gk1571 0ba00 0aa0 PC Adapter USB Cable MPI/PPI/Profibus


Programming Cable 6GK1571 0BA00 0AA0 PC Adapter USB A2 Cable for Siemens

Brand: AMSAMOTION
Model: 6ES7972-0CB20-0XA0
Specification: 

  • Brand Name: AMSAMOTIO
  • Driver type: Solid
  • Insulation material: Rubber
  • Conductor material: Copper
  • Model number: 6ES7972-0CB20-0XA0
  • Can be customized: Yes
  • Type: for 6gk1571 0ba00 0aa0
  • Application: USB-MPI + S7-200 / 300/400

Condition: NEW
Origin: China
Warranty: N/A

৳ 5,300.00 ৳ 5,500.00

Siemens MPI Cable 6gk1571 0ba00 0aa0 PC Adapter USB Cable MPI/PPI/Profibus

Siemens MPI Cable 6gk1571 0ba00 0aa0 PC Adapter USB Cable MPI/PPI/Profibus

MPI protocol is a multi-point interface that is suitable for PLC 200/300/400, operator Panel PC MPI / PROFIBUS and TP / OP communication card. Supports 12Mbit / s MPI network communication speed. Furthermore the MPI network can connect to maximum 32 nodes. The maximum communication distance is 50 m. Also the length can be extended by using repeaters.

The PPI, MPI and PROFIBUS protocols are based on the seven-layer network. These are in line with European standards EN50170 PROFIBUS defined by and token-based network communication protocols. Furthermore these protocols are a synchronous (serial) character-based communication protocol. Above all the Character format consists of a start bit, 8 bits of data, parity bits, and one stop bit.

Feature:

  • Support Win2000/XP/7 32/64 bit System
  • Siemens style design
  • Support S7-200/300/400, ET200, 840D communication
  • Also Support MPI/DP/Profibus/PPI
  • Suitable for Profibus node to program PLCs among network as well as no need power supply from PLC side.
  • Supports full rate 9600,  19200, 45.45K,  93.75K,  187.5K, 500K,1.5M kps, certainly auto adaptable
  • Full optical electronic isolation which makes it better anti-interruption ability, even more stable communication.
  • Installing original Siemens drive with USB interface directly, also no need any COM port.
  • Above all no need to install driver when using STEP 7 V5.5 above

Siemens MPI Cable 6gk1571 0ba00 0aa0 Specifications:

  • Brand Name: AMSAMOTION
  • Driver type: Solid
  • Insulation material: Rubber
  • Conductor material: Copper
  • Model number: 6ES7 972 0CB20 0XA0
  • Customizable : Yes
  • Type: for 6gk1571 0ba00 0aa0
  • Application: USB-MPI + S7-200/300/400

Connecting Siemens MPI Cable to a PC :

  • Connect the programming Cable
  • Check the proper operation by clicking on the Accessible Node icon.
  • A window will pop up. Then close the Accessible Nodes window and proceed to the download or upload section
  • An error message will appear if the communication fails.This indicates that the cable is not in the right computer port or the cable is not plugged in properly.
  • In order to communicate the PLC with the programming cable and protocol you will need to match the “PG Interface” setting. To do this, select the menu
    Options >Set PG/PC Interface.
  • A dialog box will open up displaying all the different interfaces (i.e. communication drivers).
  • Each cable has its own interface. For Siemens MPI Cable 6gk1571 0ba00 0aa0 PC Adapter USB Cable MPI/PPI/Profibus Cable you will need to select PC Adapter(Auto).

Alternate of PC Adapter USB A2:

You can use this cable as a replacement of siemens PC Adapter USB A2 cable. It’s an all in one cable for Siemens PLC. It supports siemens S7  -200 / 300/400 PLC DP PPI Profibus MPI.PC ADAPTER USB A2 USB-ADAPTER (USB V2.0) FOR CONNECTING A PG/PC OR NOTEBOOK TO SIMATIC S7 VIA PROFIBUS OR MPI USB CABLE 5M INCLUDED CAN BE USED UNDER WINXP/VISTA/ WINDOWS 7  32/64BIT.

The following software packages support the USB A2 PC adapter:

  • STEP 7
  • TIA Portal
  • NCM PC
  • SIMATIC PDM
  • Drive ES

Amsamotion Driver Download
Show Other Products

5/5 (1 Review)
SKU: 5686 Category:
%d bloggers like this: