Call:- 01670-070357 to repair your industrial electronics items.

Siemens S7 200 USB PPI PLC Programming Cable


Model: USB-PPI
Brand: Amsamotion
Origin: China
Interface: USB-9pins Male plug
Cable Length: 2.5M
Baud Rate: Support 9.6KBD/S、19.2KBD/S

  • Supports all Siemens S7-200 PLC. Best Budget PLC Programming Cable.
  • USB interface for hassle free plug and play application. Good quality Product.

Amsamotion USB PPI Driver
Show Other Products

Video Tutorial

Call for Repair

Siemens S7 200 USB PPI PLC Programming Cable

Siemens S7 200 USB PPI PLC Programming Cable

Model: USB-PPI

Brand: Amsamotion

Origin: China

Interface: USB-9pins Male plug

Cable Length: 2.5M

Baud Rate: Support 9.6KBD/S、19.2KBD/S

Supports all Siemens S7-200 PLC. Best Budget PLC Programming Cable.USB interface for hassle free plug and play application. Good quality Product.

Amsamotion is a well known PLC Programming cable manufacturer in China. Siemens PPI Cable is one of the quality products of Amsamotion. Investing too much money just of a programming cable is not a wise decision.

Buy our USB PPI PLC Programming Cable at best price from Dhaka Bangladesh.

What is Siemens PPI Cable?

PPI communication Protocol is a specially developed  for S7-200 series PLC. The communication port of S7 200 CPU (Port0, Port1) supports the PPI Protocol, and some of the modules S7 200 support the communication protocol Profibus. Micro / WIN programming software is used for communication with the CPU through the PPI Protocol. PPI is the main station’s master / slave protocol in a token ring network from the station. A PPI network, with one station is standing and there is no limit to the number of stations, but not more than 32 can be one of the primary stations in the network number. Main station can read and write station data as well as read and write data to the station’s master station data. In other words, as the PPI at t, S7-200, you can still respond to requests for data from other stations.

Difference between PPI & MPI

PPI is “point to point” type network but you can also have multiple PLCs and HMIs in your PPI network. PPI is fundamentally a glorified RS485 networking. It is basically meant to communicate slowly for short data packets. MPI works on another principle, though. It is loosely based on the standard Profibus but some additional features such as Global Data Communication.


Steps of Connecting Siemens S7 200 USB PPI PLC Programming Cable

1. Launch Siemens programming software.
2. Select PLC – Type.
3. Click on the Set PG/PC Interface
4. In the Access Path, select PC/PPI cable (PPI).
a) Click the Properties button.
5. Click on Local Connection:
a) Assign the COM Port. Check your COM port before assigning the
number.
6. PPI :
a) Assign the station address (#0 is assigned for this test)
b) Set the transmission rate at 9.6kbps
c) Highest node addess is 31
d) Click the OK button to exit from the Properties dialogue box
7. Click on the Communications button
8. Double Click on “Double Click to Refresh” Button
9. Wait untill the plc model is shown in the right side
10.Finnaly double click on the plc model shown right side

Amsamotion USB PPI Driver
Show Other Products

Video Tutorial

SKU: 5880 Category:
Call Now Button