TP700 Comfort Siemens HMI

TP700 Comfort 6av2 124 0gc01 0ax0 Siemens Simatic HMI

TP700 Comfort 6av2 124 0gc01 0ax0:

SIMATIC HMI TP700 Comfort (6av2 124 0gc01 0ax0), Comfort Panel, Touch operation, 7″ widescreen TFT display, 16 million colors, PROFINET interface, MPI/PROFIBUS DP interface, 12 MB configuration memory, Windows CE 6.0 (Microsoft Support included Security updates discontinued) configurable from WinCC Comfort V11.

The Siemens 6AV2124-0GC01-0AX0 is a TP700 Comfort Panel with a 7 inch widescreen TFT display. It has 12MB of user memory, Windows CE 6.0, as well as Profinet and MPI/Profibus DP interfaces. The panel uses a 24V DC supply input, with a permissible range from 19.2 V to 28.8 V.  It’s input current has a consumption of 0.5 A.

Operating Instructions:

When connecting the power supply, be sure to switch it off before connecting to the HMI. Check the correct polarity of the cables using the interface marking on the back of the panel. Once the power supply connector is in the corresponding socket of the HMI, switch on the power. The HMI is equipped with a reverse polarity protection circuit. Once the power is turned on, the 6AV2124-0GC01-0AX0 display will light up. If the panel fails to start, you may have crossed the cables at the power supply connector. Once the operating system starts, the desktop with the Start Center is displayed. The panel will automatically switch to “Transfer” mode during the initial startup if either no project is loaded on the HMI device, or if at least one data channel has been configured.

Siemens TP700 Comfort 6av2 124 0gc01 0ax0 Specifications:

More info

Siemens TP700 Comfort Manual
Show Other Products