WAGO 750 352 Fieldbus Coupler
WAGO 750 352 overview:
The 750-352 ETHERNET Fieldbus Coupler connects ETHERNET to the modular WAGO-I/O-SYSTEM. The fieldbus coupler detects all connected I/O modules and creates a local process image. This process image may include a mixed arrangement of analog (word-by-word data transfer) and digital (bit-by-bit data transfer) modules.
Two ETHERNET interfaces and an integrated switch allow the fieldbus to wired in a line topology. This eliminates additional network devices, such as switches or hubs. Both interfaces support Auto-Negotiation and Auto-MDI(X). The DIP switch configures the last byte of the IP address and may use for IP address assignment (DHCP, BootP, static).
The coupler is designed for fieldbus communication in both EtherNet/IP and MODBUS networks. It also supports a wide variety of standard ETHERNET protocols (e.g., HTTP, BootP, DHCP, DNS, SNMP, FTP). An integrated Webserver provides user configuration options, while displaying coupler’s status information. The coupler has an integrated supply terminal for the system voltage. The field power jumper contacts supplied via a separate supply module.
- 64 I/O modules
- Configuration via PC and 2 x RJ45 bus coupler connections
- Power supply voltage of 24VDC (-25% to 30%)
- Typical input current of 280mA at 24V rated load
- Total current for I/O modules is 700mA at 5V
- Interface: Ethernet
- Voltage Rating (DC): 24 V
- Termination: Cage Clamp
- Min Operating Temperature: 0 °C
- Max Operating Temperature: 55 °C
Be the first to review “WAGO 750 352”